This is a description of the Mire Man build. The body size is based off a 6.5 to 7 foot male. I am using 3/4 inch PVC and building out the shape with Free Form Air epoxy dough. First cut pic pipe into sections for arms, spine, neck, legs etc... I used rough measurements of 7 foot man. Attach PVC together with pic cement. Then use heat gun to bend pic to the correct shape. Strengthened pvc with Smooth Cast 325 Resin Shave foam head to size Used Toms shoe inserts and Crayola Model Magic clay to build out feet and build out legs using bubble wrap sheets Covered feet with Free Form Air Strengthened neck Used Free Form Air to make Fingers sections, drilled holes and connected with wire clothes hangers Filled in knuckle areas with more Free Form Air.